STAGE 1R - 250 HP
ULTIMATE STOCK MUFFLER PACKAGE
250 HP PUMP GAS
If your goal is to keep the stock exhaust, this package is made for you!
By replacing the stock air intake and increasing the boost level, we were able to achieve 250hp with the stock exhaust.
You can expect an insane throttle response with this kit while keeping it as quiet as possible.
kit include:
- Stage 1R Ecu reflash
- Precision EFI Air Intake
We also suggest you upgrade the Blow Off Valve since we've seen numerous failures regarding this part.
Please take note that this power package requires the addition of some adjustable ramps in the primary clutch
The Precision EFI knock system is included in all our reflash.
Please take note that this power package requires the addition of some adjustable ramps in the primary clutch
Ramp adjustment starting point
For a stock spring and helix combination in good condition, to achieve the target RPM. Please note; a modified spring and helix combination affects the final result. Therefore, we cannot provide settings for every application.
The test should be performed as follows: accelerate quickly but gradually to avoid track slippage. While accelerating, wait for the RPM to stabilize, then take an RPM reading. If the RPM is too high, add weight; if too low, reduce the weight.
Note that surface conditions vary and affect RPM.
- Target RPM: 9000
- Team Clutch : Ramp Kit Dalton QaY-70 set to total of 73 g (use purple Loctite)
- A screw head flush with the top of the hole (at the heel) is the most common setting.
